This D-Max heat shrink tubing set offers a reliable solution for insulating and protecting electrical wires and solder joints in red and black colors. It is particularly suitable for model building and hobby applications, but can also be used for various other electrical repairs and installations. When heated, the tubing shrinks to half its original diameter, perfectly conforming to the component to protect it from moisture, abrasion, and short circuits.

Key Features

• Precise 2:1 Shrink Ratio: When heated, the tubing shrinks uniformly to 50% of its original diameter, ensuring a tight and secure fit on cables and connectors.
• Flexible Polyolefin Material: The material used provides good electrical insulation and is resistant to common fluids and mechanical stress in hobby and workshop use.
• Wide Temperature Range: After shrinking, the tubing is designed for an operating temperature range of -55 °C to +125 °C, making it suitable for diverse environmental conditions.
• Low Shrink Temperature: The shrinking process begins at just 70 °C and is fully completed at 110 °C, allowing for gentle processing with a heat gun.
• Low Longitudinal Shrinkage: With a maximum longitudinal shrinkage of only 5%, the covered cable length remains largely preserved even after heating.
• Color Coding: The set includes one meter of red and one meter of black tubing, facilitating clear identification of polarities (e.g., positive and negative) or different lines.

Technical Data

• Material: Polyolefin (PE)
• Diameter (before shrinkage): 12 mm
• Width (flat, before shrinkage): 18.5 mm
• Wall Thickness (before shrinkage): 0.25 mm - 0.35 mm
• Shrink Ratio: 2:1
• Radial Shrinkage: ≥ 50 %
• Longitudinal Shrinkage: ≤ 5 %
• Shrink Temperature (minimum/complete): 70 °C / 110 °C
• Operating Temperature: -55 °C to +125 °C
• Colors: Red, Black

Scope of Delivery

• 1x Heat Shrink Tubing D12 mm, Red (1 meter length)
• 1x Heat Shrink Tubing D12 mm, Black (1 meter length)

Application

This set is aimed at users in RC model building, hobby electronics enthusiasts, and anyone looking to perform professional cable repairs or assembly. For processing, a suitable heat source such as a heat gun is required to shrink the tubing evenly and in a controlled manner.